Skip to main content

Toilet repairs & replacement / Brisbane

Toilet repairs & replacements in Brisbane. Find out what needs fixing.

Is the cistern constantly filling, is water leaking at the base or is the flush not clearing properly? We’ll check whether the problem is in the toilet or further along the drain, then explain the options.

Tell us your suburb and what the toilet is doing. We’ll confirm whether we cover your area.

Understand the symptom
Assess repair or replacement
Discuss what to do next

Start with what you notice

What is your toilet doing?

The fault may be in the cistern, a connection or the drain. Note when it happens and whether other fixtures are affected.

It keeps running

Water continues trickling into the pan after a flush, or the cistern refills again and again. A valve or seal may not be closing as it should.

There’s water where it shouldn’t be

Moisture around the cistern, pan, isolation valve or flexible connection needs attention. The source matters: not every leak comes from inside the cistern.

The flush has changed

A weak, incomplete or inconsistent flush can have several causes. If other fixtures are also slow or backing up, the drainage line may be involved.

Something feels loose or worn

A moving seat, handle or cistern component can be more than an annoyance. A plumber can check which parts are repairable and whether the fixture is sound.

Water actively escaping? If safe, use the toilet’s isolation valve to stop the supply while arranging help. Don’t touch wet electrical equipment.

Find the source of the problem

Toilet, cistern or drain line?

We’ll check the toilet and look for signs that the problem may extend beyond the fixture.

Explore blocked drain help
A

At the cistern or connection

Repeated filling or water around the cistern, isolation valve or flexible connection can have different causes. We’ll find the source before recommending a repair.

B

At the pan or flush

A poor flush, blockage in the pan, loose fitting or damaged part may need a toilet repair. If the problem keeps returning, we’ll look for the cause.

C

Further along the drain

If other fixtures are affected, gurgling or backing up, there may be a shared drain problem. Replacing the toilet may not fix it.

Repair or replace?

A new toilet isn’t always the answer.

A faulty inlet or outlet valve, seal, isolation valve or flexible connection may be repairable. If the toilet is in good condition, it may not need replacing.

Replacement may be worth considering if the pan or cistern is damaged, parts are hard to source, faults keep returning or you want to upgrade. The choice depends on the fixture and your bathroom.

Understand the options before proceeding. Quest can explain what has been found and discuss the proposed work and pricing.

REPAIR OR REPLACE / A PRACTICAL CHECK

What has failed?

Identify the leak, flush fault, blockage or damaged part.

Is repair a sound option?

Consider fixture condition, compatible parts and whether the issue is recurring.

Will a replacement fit?

Check the waste arrangement, setout, connections, space and installation constraints.

Talk through the options

Planning a replacement?

Check the fit before you buy.

S-trap and P-trap describe the direction of the waste outlet: through the floor or through the wall. For an S-trap, measure from the finished wall to the centre of the floor waste. This setout is an important fit check. The pan and cistern must also suit each other and the existing water connection; wall finish, room clearance and installation requirements matter too.

Measurements are a starting point, not a guarantee that a model will fit. Check the selected toilet against the bathroom before purchase or installation.

Read the toilet setout guide

What happens next

From first call to repair.

Tell us what you have noticed. We’ll check the issue, explain what we find and discuss suitable work.

See general plumbing repairs

Tell us what changed

Describe what the toilet is doing, when it started, whether there is visible water and if other fixtures are affected.

Assess the setup

Quest looks at the toilet, cistern and relevant connections, and considers whether symptoms point to a drain-line issue.

Discuss suitable work

Understand the findings and whether a repair, further investigation or replacement discussion is appropriate.

Discuss the work and price

We’ll explain the work and pricing before you decide. If the toilet needs replacing, we’ll also check what will fit.

Common questions

Toilet repairs, replacement and setout.

Answers to common questions about toilet repairs, replacement and setout.

Brisbane service areas
Why does my toilet keep running after it has flushed?
The cistern may not be shutting off or refilling properly. The inlet valve, outlet valve or a seal may be at fault. We’ll check the cistern and explain whether it can be repaired.
Is a blocked toilet always a blocked drain?
No. The blockage may be in the toilet pan or further along the drain. If other fixtures are gurgling, draining slowly or backing up, tell us when you call. See our blocked drains service for drain-line problems.
Can a leaking toilet be repaired, or does it need replacing?
Many leaks come from a part or connection that can be replaced. It depends on where the water is coming from and the condition of the toilet. We’ll check whether repair is practical or if replacement is worth considering.
What do S-trap and P-trap mean?
They describe where the toilet’s waste outlet connects to the drain: through the floor for an S-trap or through the wall for a P-trap. The existing arrangement affects which replacement toilets may fit.
What is toilet setout, and why does it matter?
For a floor-outlet S-trap, setout is the distance from the finished wall to the centre of the floor waste connection. It is an important fit measurement, but the pan design, wall finish and installation requirements matter too. Read our guide to understanding toilet setouts before choosing a replacement.
Can I choose any toilet to replace the existing one?
Not always. Trap type, setout, waste position, water connection, available space and installation requirements all affect what will fit. We can discuss the existing setup before you choose a replacement.
What should I do if water is actively leaking?
If it is safe and you can find the toilet’s isolation valve, turn it off to limit the leak while you arrange help. Do not touch wet electrical equipment and keep clear of contaminated water. If you cannot stop the leak or are unsure, call us and describe what you can see.
Do you service my Brisbane suburb?
Tell us your suburb when you call or enquire and we’ll confirm whether we cover your area.

Homeowner perspective

Hear from Quest customers.

Read reviews from Quest customers.

Toilet repairs and replacement

Let’s get your toilet working properly.

Tell us what you have noticed and your suburb. We’ll confirm whether we cover your area and discuss the next step.

Quest Plumbing & Gas helps Brisbane homeowners with toilet repairs and replacement. Share your suburb so we can confirm service-area coverage.

Message Quest

Send an enquiry directly to Quest. No Facebook sign-in needed.

Open Facebook Messenger

Optional. Opens Messenger in a new tab and may require Facebook sign-in.