Skip to main content

Hot water systems / Brisbane homes

Hot water systems in Brisbane. Repair or replace?

No hot water, a leak or a system that cannot keep up? We’ll assess the existing system and explain whether repair or replacement may be suitable.

Tell us what has changed, what type of system you have and your suburb. We’ll confirm whether we cover your area.

Hot water storage system installed beside the exterior brick wall of a residential property
Residential hot-water system.
Recognise the symptoms
Assess the existing system
Discuss repair or replacement

Start with what you notice

Notice a change in your hot water?

Different symptoms can have different causes. A few details about what has changed can help us assess the system before discussing repair or replacement.

Call Quest — 07 3609 2339
01No hot water, or it runs out sooner than it used to
02Water temperature changes while a tap or shower is running
03A pilot light will not stay lit, or the unit displays a fault
04Water around the base of a storage tank or beneath the unit
05Unusual noises, rust or visible deterioration
06A system that needs repeated attention to keep working

A real Brisbane installation

Before and after a hot-water replacement.

These photos show a Bosch Highflow 26e before replacement and a Rinnai Infinity B26 afterwards. The right system depends on the home and its installation.

Existing Bosch Highflow 26e gas continuous-flow hot water system before replacement
BeforeBosch Highflow 26e
Installed Rinnai Infinity B26 gas continuous-flow hot water system after replacement
AfterRinnai Infinity B26

Assess the system before deciding

Does the system need a repair or replacement?

A leak, ignition fault or changing water temperature can have different causes. We’ll look at the symptoms and the installed system, then explain the options.

Repair may be an option. The right approach depends on the fault, the system’s condition, parts availability and whether the current setup suits your household.

01

Describe

Which taps are affected? Is there a leak, a fault code or no hot water at all? Note when it began and whether it is intermittent.

02

Assess

Discuss the system type, make and model, the symptoms, and what can be established about its condition and installation.

03

Compare

Where appropriate, talk through repair and replacement options, including practical considerations for your existing services and household use.

04

Decide

Understand the proposed work and pricing before proceeding. If more information is needed, that can be part of the next-step conversation.

Know the broad options

Which hot-water system suits your home?

The right system depends on the fuel supply, available space, existing connections and how your household uses hot water.

Stored hot water

Gas or electric storage

A tank heats and stores water for use. Its condition, location, capacity and existing connections all matter when considering a replacement.

  • Tank condition and signs of leakage
  • Space and existing plumbing connections
  • Household use and the current setup

On-demand hot water

Gas continuous flow

The unit heats water as it flows through, rather than storing it in a tank. Suitability depends on the home’s gas supply, installation and hot-water use.

  • Existing gas connection and location
  • What the household expects from the system
  • Installation requirements at the property

Planning a replacement

What to expect from a new installation.

We’ll discuss a suitable system, check the installation details and test it once the work is complete. Requirements vary by property.

Request a quote
01

Selection

Discuss the current system, household requirements and suitable options for the property before settling on a direction.

02

Installation planning

Consider the unit location, existing water and gas or electrical services, access and what the proposed work involves.

03

Installation

Carry out the agreed work in line with the selected system and the conditions at the home.

04

Commissioning

Check the installed system’s operation and talk through its use so you know what to expect from the new setup.

Common questions

Common hot-water questions.

Answers to common questions about hot-water systems.

For more context, read our guides to relief valve discharge and storage hot-water maintenance.

Ask Quest
Should I repair my hot water system or replace it?
It depends on the fault, the system’s age and condition, whether parts are available and whether the setup suits your household. We’ll assess what is wrong, then explain the repair and replacement options.
What information should I have ready when I call?
Tell us whether it is gas or electric, storage or continuous flow, and what has changed. Only check the make, model or data plate, or take a photo, if it is safe to approach and there is no suspected gas leak or immediate hazard. Do not approach an unsafe unit just to collect details.
What is the difference between storage and continuous-flow hot water?
A storage system heats water in a tank. A continuous-flow system heats it as it passes through the unit. The right option depends on the home’s services, available space and how much hot water the household uses.
Can you help with gas and electric hot water?
Yes, we can discuss residential gas and electric hot-water faults and replacement options. Gas work must be done by an appropriately licensed gas fitter, and electrical work by an appropriately licensed electrician. Tell us the type of system and your suburb when you call.
There is water leaking from the system. What should I do?
Call Quest on 07 3609 2339 and tell us where it’s leaking. If you know how to safely turn off the unit’s water supply, do so. Keep clear of hot water and wet electrical fittings.
Do you cover my Brisbane suburb?
Tell us your suburb when you call or enquire and we’ll confirm whether we cover your area.

Homeowner perspective

Hear from Quest customers.

Read reviews from Quest customers.

Hot-water repairs and replacement

Need help with your hot water?

Tell us what the system is doing and your suburb. We’ll confirm whether we cover your area and discuss the next step.

Quest Plumbing & Gas helps Brisbane homeowners with residential hot-water work. Share your suburb so we can confirm service-area coverage.

Message Quest

Send an enquiry directly to Quest. No Facebook sign-in needed.

Open Facebook Messenger

Optional. Opens Messenger in a new tab and may require Facebook sign-in.