Skip to main content

Toilets

Toilet setout: what to check before replacing a pan

S-trap or P-trap? Learn what each outlet means, what to measure and why a plumber still needs to confirm the fit on site.

First, identify where the waste goes

A toilet pan has to connect to the existing waste pipe. An S-trap pan discharges through the floor; a P-trap pan discharges horizontally towards the wall. The trap type describes the outlet direction, not the shape of the seat or cistern.

A back-to-wall toilet can hide the pipework. If you cannot see the connection without moving the pan, don't guess the outlet type from a photo. Check the installation sheet for the existing model if you have it.

What does “setout” measure?

For a typical floor-outlet S-trap, setout is the distance from the finished wall behind the pan to the centre of the floor waste outlet. For a wall-outlet P-trap, check the outlet height from the finished floor and how it lines up with the wall connection. Compare your measurements with the manufacturer's installation drawing. Setout ranges and connections vary between models.

Measure from finished surfaces, not unfinished framing. Also note the available depth, nearby fixtures, cistern and water supply. A pan can have the right-looking outlet and still not fit the space.

What if the outlet is hidden?

Don't remove the pan just to get a measurement. Note the make and model if you can see the label, keep any installation paperwork and take photos of the room and visible connections. A plumber can check the hidden waste position and whether the replacement and its connector will fit.

Don't order based on an approximate tape measurement alone. If you're comparing models, ask the installer to check the installation drawings before you buy.

What to look for

  • Take a photo of the toilet and any visible outlet or model label. Don't dismantle it.
  • Note whether the waste goes through the floor or wall. If it's hidden, mark it as unknown.
  • Keep the proposed model's installation drawing to discuss with a plumber.

Work for a licensed tradesperson

  • Check the waste position, connection compatibility and any water-supply changes.
  • Disconnect, install and test the toilet and regulated plumbing connections.

Need help with plumbing at your place?Call Quest or request a quote.

Message Quest

Send an enquiry directly to Quest. No Facebook sign-in needed.

Open Facebook Messenger

Optional. Opens Messenger in a new tab and may require Facebook sign-in.